MORE INFO

LIMITED WARRANTY
This warranty covers all defects in material and workmanship for 12 months from the date of shipment from us to the purchaser. This warranty does not cover damage to or deterioration of the REM-Dreamer components resulting from accident, misuse, neglect, unauthorized repair or failure to follow instructions in the manual. This warranty does not cover units that have been modified or altered. This warranty does not cover damage that may occur during shipping.

When returning a device for repair, the owner pays shipping costs to us, and we pay shipping costs from us to the owner. Shipment of the product to us is the responsibility of the owner, and should be insured by the owner for the full value of the product.

WARNING!
Flashing lights can induce seizures in photo-sensitive epileptics, and although no seizures have been induced by the REM-Dreamer, epileptics or those with a family history of epilepsy should not use the REM-Dreamer.

The REM-Dreamer controls consist of two rotary switches and a button. The left rotary switch is used as menu. The right switch is used to choose the value of the parameter to be loaded into the unit. In some cases the right rotary switch acts as a menu too.

Left Rotary Switch Values:
0 – for sleeping with the REM-Dreamer after assigning all settings, for testing the REM detector, and for generating a preview of the series of cues.
1 – selecting one of three presets (light, medium and deep sleep), for turning TWC on or off, for turning the DreamAlarm on or off.
2 – setting the length of a series of cues (2-40 seconds)
3 – setting the flash brightness level (0-9)
4 – setting the sound volume level (0-9)
5 – setting the length of each cue (0.05-0.45 second)
6 – setting the number of cues per second (1-9)
7 – setting the sensitivity of the REM detector (0-9)
8 – checking how many series of cues were generated during the night
9 – turning the device on or off

When you rotate the switches to each position you must press the button to load the changes into the unit. For example, if you want to set the flash brightness to maximum, set the left switch to 3 and right switch to 9 and press the button. A short beep will tell you that the particular parameter has been set and loaded in.

More about using the REM-Dreamer can be found in the 16-page manual included with the device.